Clear Ion Exchange Engineers
Ramol, Ahmedabad, Gujarat
GST No. 24ABGPS2406K1ZO
TrustSEAL Verified
Call 0804861807485% Response Rate
SEND EMAIL
Product Details:
| Model Name/Number | TM 710 FR 4040 |
| Capacity | 2,400gpd(9.1)m^3 /d |
| Diameter | 4 inch |
| Pressure | 600psi (4.1 MPa) |
| Brand | Toray Membranes |
| Feed Water pH Range, Continuous Operation | 2-11 |
| Feed Water pH Range, Chemical Cleaning | 1-12 |
| Maximum Pressure Drop per Element | 15 psi (0.10 MPa) |
| Maximum Pressure Drop per Vessel | 50 psi (0.34 MPa) |
| Maximum Feed Water SDI15 | 5 |
Toray Reverse Osmosis and Nanofiltration spiral wound membrane elements have been produced since 1967, starting with cellulose acetate membrane elements. Today, the product line includes a full range of state-of-the-art cross-linked polyamide composite membranes. The range of ultrafiltration elements, both in pressurized and submerged configurations, is employing a PVDF hollow-fiber, out-in concept and serves in numerous water treatment units around the world.
Toray's membrane modules for membrane bioreactors are using flat-sheet PVDF membranes and can be configured for gravity-driven or suction-controlled operation.
Benefits and Features:
Product Details:
| Model Name/Number | TM710D |
| Capacity | 2,600 gpd 9.8 (m3 / d) |
| Diameter | 4 inch |
| Pressure | 600 psi (4.1 MPa) |
| Brand | Toray |
| Maximum Feed Water Temperature | 113F 45C |
| Maximum Pressure Drop per Vessel | 60 psi (0.4 MPa) |
| Maximum Pressure Drop per Element | 20 psi (0.14 MPa) |
| Feed Water Chlorine Concentration | <0.1ppm |
| Feed Water pH Range, Chemical Cleaning | 1-13 |
| Maximum Feed Water SDI15 | 5 |
| Feed Water pH Range, Continuous Operation | 2-11 |
Toray Reverse Osmosis and Nanofiltration spiral wound membrane elements have been produced since 1967, starting with cellulose acetate membrane elements. Today, the product line includes a full range of state-of-the-art cross-linked polyamide composite membranes. The range of ultrafiltration elements, both in pressurized and submerged configurations, is employing a PVDF hollow-fiber, out-in concept and serves in numerous water treatment units around the world. Toray's membrane modules for membrane bioreactors are using flat-sheet PVDF membranes and can be configured for gravity-driven or suction-controlled operation.
Benefits and Features:
Typical Applications:
Product Details:
| Model Name/Number | TM720D-400 |
| Capacity | 11,000(41.6) gpd(m3 / d) |
| Size/Dimension | 40 (1,016) Inches (millimeter). |
| Pressure | 600 psi (4.1 MPa) |
| Brand | Toray |
| Feed Water Chlorine Concentration | <0.1ppm |
| Maximum Feed Water Temperature | 113F |
| Maximum Feed Water SDI15 | 5 |
| Feed Water pH Range, Continuous Operation | 2-11 |
| Feed Water pH Range, Chemical Cleaning (30min.) | 1-13 |
| Maximum Pressure Drop per Element | 20 psi (0.14 MPa) |
| Maximum Pressure Drop per Vessel | 60 psi (0.4 MPa) |
Today Reverse Osmosis and Nanofiltration spiral wound membrane elements have been produced since 1967, starting with cellulose acetate membrane elements.
Today, the product line includes a full range of state-of-the-art cross-linked polyamide composite membranes.
The range of ultrafiltration elements, both in pressurized and submerged configurations, is employing a PVDF hollow-fiber, out-in concept and serves in numerous water treatment units around the world.
Toray's membrane modules for membrane bioreactors are using flat-sheet PVDF membranes and can be configured for gravity-driven or suction-controlled operation.
Benefits and Features:
Product Details:
| Usage/Application | RO Plant |
| Brand | Hydranautics |
| Capacity | 2,250 gpd (8.5 m3/d) |
| Weight | 3.6 kg |
| Model/Type | CPA2-4040 |
| Minimum Salt Rejection | 99.5% (99.2% minimum) |
| Applied Pressure | 600 psig (4.14 MPa) |
Hydranautics membranes are used to treat a wide range of highly variable waters as either primary treatment or as pretreatment to reverse osmosis (RO) and nanofiltration (NF). Compared to conventional pretreatment, Hydranautics combine benefits of high recovery and low footprint requirement due to its optimized membrane area and novel cleaning regimes. CPA (Composite Polyamide) elements set the standard for RO membrane elements – over 600 million gallons per day of pure water are produced by CPA elements for global municipalities and industries. 4” and 8” configurations available.
Advantages:
Applications:
Product Details:
| Usage/Application | RO Plant |
| Brand | Hydranautics |
| Capacity | 10,000 gpd (37.9 m3/d) |
| Size | 1016 mm |
| Weight | 16.4 kg |
| Model/Type | CPA2-8040 |
| Country of Origin | Made in India |
Hydranautics membranes are used to treat a wide range of highly variable waters as either primary treatment or as pretreatment to reverse osmosis (RO) and nanofiltration (NF). Compared to conventional pretreatment, Hydranautics combine benefits of high recovery and low footprint requirement due to its optimized membrane area and novel cleaning regimes. CPA (Composite Polyamide) elements set the standard for RO membrane elements – over 600 million gallons per day of pure water are produced by CPA elements for global municipalities and industries. 4” and 8” configurations available.
Advantages:
Applications:
Product Details:
| Brand | Hydranautics |
| Capacity | 9,000 gpd (34.1 m3/d) |
| Applicable Industry | RO |
| Features | Low differential LD Technology models are offered to minimize colloidal fouling when used |
| Size | 8 inch |
| Weight | (13.5 +- 1) kg |
| Model/Type | SWC5-LD |
| Country of Origin | Made in India |
Other Details:
SWC5 seawater reverse osmosis membranes provide optimum salt rejection and permeate flows.
They are chosen when lower permeate TDS and lower feed pressures are needed.
SWC5 seawater
They are chosen when lower permeate TDS and lower feed pressures are needed.
SWC5 seawater reverse osmosis membranes offer highest energy efficiency at lowest costs and are used in mega desalination plants.
Low differential LD Technology models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment.
They offer consistently low feed pressures and highest duration between two successive cleanings.
They offer consistently low feed pressures and highest duration between two successive cleanings.
Product Details:
| Maximum Feed Silt Density Index | SDI 5 |
| Maximum Operating Temperature | 113degF |
| Membrane Type | Polyamide Thin-Film Composite |
| Maximum feed flow rate | 16 gpm |
| Free chlorine concentration | 0.1 ppm |
| Maximum Operating Pressure | 600 psig |
| Maximum Pressure Drop | 15 psig |
| Country of Origin | Made in India |
Product Details:
| Maximum Feed Silt Density Index | SDI 5 |
| Maximum Operating Temperature | 113degF |
| Continuous Operation Ph Range | 11 |
| Short-Term Cleaning | 13 |
| Maximum Element Pressure Drop | 15 psig |
| Free Chlorine Tolerance | 0.1 ppm |
| Maximum Operating Pressure | 600 psig |
| Country of Origin | Made in India |
FilmTec™ BW30-365 Elements are ideal for reverse osmosis plant managers and operators dealing with challenging water and seeking consistent, high performance and long element life.
Uses:
Industrial water demineralization
Production of municipal drinking water
Advantages:
Decades of proven performance
Delivers high quality permeate water while minimizing unit cost
Offers the most effective cleaning performance, robustness and durability due to its widest cleaning pH range (1 – 13) tolerance and the support of DuPont technical representatives
Product Details:
| Membrane Type | Polyamide Thin-Film Composite |
| Maximum Element Pressure Drop | 15 psig (1.0 bar) |
| pH Range, Continuous Operationa | 2 - 11 |
| Free Chlorine Tolerancec | <0.1 PPM |
| Maximum Feed Silt Density Index (SDI) | SDI 5 |
| Maximum Operating Temperature | 113F |
| Maximum Operating Pressure | 1,200 psig (83 bar) |
| pH Range, Short-Term Cleaning (30 min.)b | 1 - 13 |
| Country of Origin | Made in India |
Product Details:
| Membrane Type | Polyamide Thin-Film Composite |
| Maximum Operating Pressure | 600 psig |
| Free Chlorine Concentration | 0.1 ppm |
| Maximum feed flow rate | 16 gpm |
| Length | 40 inch |
| Maximum Pressure Drop | 15 psig |
| Country of Origin | Made in India |
Product Details:
| Free Chlorine Tolerancec | < 0.1 ppm |
| Membrane Type | Polyamide Thin-Film Composite |
| Maximum Operating Pressure | 600 psig (41 bar) |
| pH Range, Continuous Operationa | 2 - 11 |
| Maximum Feed Flow | 85 gpm (19 m3/hr) |
| Maximum Operating Temperaturea | 113F |
| Maximum Pressure Drop | 15 psig (1.0 bar) |
| pH Range, Short-Term Cleaning (30 min.)b | 1 - 13 |
| Maximum Feed Silt Density Index | SDI 5 |
The Filmtec BW 30-400 Dow RO Membrane is the product of choice when the highest quality permeate is required. It was the first 400 square foot membrane element on the market and continues to be widely used in new equipment and retrofits where system capital and productivity are factors. Dows superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year. BW30-400 elements deliver high flow and high rejection without being chlorinated during the manufacturing process. This is one reason why DOW FILMTEC elements are more durable and may be cleaned over a wider pH range (pH 1-13) than other RO elements. With more than a decade of proven performance, BW30-400 is the product you can rely on for years of trouble-free operation.
Product Details:
| Capacity | 1000 GPD |
| Automation Grade | Automatic |
| Maximum Operating Pressure | 600 psi (41 bar) |
| Maximum Feed Flow Rate | 16 gpm (3.6 m3/h) |
| Maximum Pressure Drop | 15 psig (1.0 bar) |
| Maximum Feed Silt Density Index | SDI 5 |
The Dow Filmtec BW30-4040 is widely recognized as the benchmark in the industry ensuring consistent performance and the production of water of exceptional quality. On the other hand the Dow Filmtec BW30-2540 elements are specifically engineered for systems with a flow rate smaller than 1 gpm (0.2 m3/h) featuring a robust hard shell exterior for added durability. Brackish water membranes for RO systems. These industrial membrane elements come with a hard shell exterior and are recommended for RO systems with multiple element housings containing three or more membranes as they are designed to withstand higher pressure drops. Get Best Price of Dow Filmtec BW30-4040 RO Membrane at ₹11500/-
Product Details:
| Capacity | 2500 gpd |
| Membrane Length | 1,016 mm (40 in.) |
| Pressure | 41 bar (600 psig) |
| Feed Water Temperature | 45 DegreeC (113 DegreeF) |
| Maximum Chlorine Concentration | < 0.1 ppm |
| Membrane Diameter | 4 inch |
| Model Name/Number | LG BW 4040 R |
Other Details:
LG Chem’s NanoH2OTM brackish water RO membranes lower water treatment costs by improving energy efficiency and productivity.
These thin-film nanocomposite
These thin-film nanocomposite(TFN) membranes feature benign nanomaterials incorporated into the thin-film
polyamide layer of a composite membrane.
This innovative patented technology significantly increases membrane permeability while offering superior salt rejection.
Product Details:
| Capacity | 10500 gpd |
| Membrane Length | 1016 mm (40 in.) |
| Pressure | 41 bar (600 psig) |
| Feed Water Temperature | 45 DegreeC (113 DegreeF) |
| Maximum Chlorine Concentration | < 0.1 ppm |
| Membrane Diameter | 8 inch |
| Model Name/Number | LG BW 400 R |
| Country of Origin | Made in India |
Other Details:
LG Chem’s brackish water RO membranes lower the cost of desalination by improving energy efficiency and productivity. These thin-film nanocomposite (TFN) membranes feature benign nanomaterials incorporated into the thin-film polyamide layer of a composite membrane.
This innovative patented and patent-pending technology significantly increases membrane permeability while offering superior salt rejection.
Matches industry-standard flux and rejection
Easy to retrofit existing systems
Well suited for low quality feed water or varying operating conditions