Clear 250 Lph Plant is starting RO range in Industrial & commercial RO plant segment with universal industry standard size of 4040 membrane. It has single "4040" RO Membrane that gives a fantastic long lasting performance to the client requirement. It has flow rate of 250 liter per hour with the duty cycle of 2000 ltr per day. It has high demand in Schools, Hospitals, Industries, corporate offices etc. The running cost of maintenance is also low as compared to 100 lph RO Plant. The below information shows the design and specification of 250 LPH RO Plant .
We have designed this system to produce permeate flow 500 Liters per hour.
Maximum TDS Level of Raw Water (input) upto 2500 ppm.
The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
The system of recovery is properly maintained corresponding to the raw water TDS.
RO feed water limiting conditions as mentioned below are strictly maintained,
Water treatment Plant with 1000 liter per hour flow rate is recommended for Industries and corporate offices. It is small mineral water plant at your premises. The Various industrial water demand for their point of use requirement. It is very affordable and low operating cost.